Part suppliers mailorder and reconditioning

LR4x4.com Defender Forum

• Rear Anti Roll Bar February 4, 2012
  I got an anti roll bar on the back of my 110 and I think the drop links (think that's what they are called) are the wrong way round. Should they drop down from the axel to the anti roll bar or should they go up to the anti roll bar??? (null) […]
• fuel light comes on when accelerating February 4, 2012
  Hi all, Just noticed my fuel warning light comes on on my old 90 when I pull away and then goes out even though the tank is 3/4 full....cue X files theme . Any ideas from the learned and wise? J […]
• Two blown starter motors......@rse February 4, 2012
  This mormomg i was all ready to change the PAS and water pump on my 300tdi. But like everything it was not as simple as that. Turned the key starter motor threw solenoid, turned over but no fire. took key out and the starter eas still tring to turn the engine. Ended with burning smell from battery. The starter motor was shot the braided feed from the solenoi […]
• Exmoor Trim new Lock & Load seats...anyone fitted them? February 3, 2012
  New baby arriving means that the load bay of my 110 Hard Top needs something more substantial for a child seat than side facing benches. Has anyone fitted these "new" seats from Exmoor Trim? http://www.exmoortri...d.html?sef=hcfp Apparently they can be fitted without dropping the 110 fuel tank (unlike the old ones). Has anyone got the fitting instr […]
• Series Hood Sticks on 110 February 3, 2012
  I have a 1988 110. Will a set of soft top/hood sticks from a series 3 fit it? Cheers, Rich […]
• converting pick up cab to a van back?? Possible? February 2, 2012
  As the title is this something that can be done? or is it just a massive pin in the arse?? All it is, is that sometime is I need more room in the truck and I done want to put stuff in the back as it minging and generally wet/frozen :/ So how do I go about this?? sam […]
• Additional fuel tank, clues please February 2, 2012
  I picked this up from eBay the other day, I offered it up today but can't seem to get it to fit, anyone got one knows how it goes? Jason. […]
• Passenger Door Window February 2, 2012
  Just got all the new window runners and fillers fitted to new passenger front door. I'm buggered if I can get the window in though. What's the trick in refitting these? If it makes any difference its the later steel door. […]
• TD5 Flywheel February 2, 2012
  Hi, I am starting to get some noise when releasing clutch, so suspect the bearing.. So need to change this. Don't know how long the clutch has been in the car, probably since new. It is a 2006 110 TD5, with 240 000 km on the clock. So I am thinking on changing it all. Has anyone driven a long while with the SOLID type flywheel/clutch. How is the durabil […]
• GRP Puma bonnet February 1, 2012
  Just wondering if anyone has any experience with a GRP puma bonnet, the one I'm interested in is this http://www.ebay.co.uk/itm/Defender-Puma-Style-Bonnet-/250965891545?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3a6ebb99d9#ht_704wt_922 Would fit a cheque plate kit to it to help strengthen but would like to know if it's worth going that way o […]