 |
||
| |
||
| Landroverweb.com the website linking you and your Landy to the world. If you would like to add a site to this directory submit your url by sending us an e-mail! |
||
|
Propshaft & Flange (page 4) Fitting back the new Flange and brak drum: Fitting back the flange is very easy. Just bolt it back and use the new nyloc nut and foam pad/washer supplied.
Before fitting back the hand brake drum
degrease it with some petrol or thinner.
It's advisable to use a new screw when fitting back the brake drum to the flange. It will make removing the drum in future easier. Best is to apply some copper grease to the screw too.
Copper grease is your best friend! Make sure you use it on all nuts and bolts which you might have to undo again in future. However do not use it on bolts which should be fitted with Loctite (www.loctite.com) like the crankshaft pully one at the front of the 200Tdi engine. |
||
|
|
||
|
|
||
|
Website designed for Microsoft Explorer 5.0 and higher. |
||
